The following are the parameters of the ABB PPD539A102 (3BHE039770R0102) module:

Rated control circuit power supply voltage: 18V DC - 30V DC (including all tolerances, including residual voltage), with a rated value of 24V DC (A1/A2).
Rated control power supply current: Typically 110mA.
Limited continuous current: Maximum 6A (for the loop-through current paths A1/A1 and A2/A2).
Delay time: Typically 20ms (depending on the load, in the case of a voltage dip US).
Protection circuit: Yes, within the operating voltage limits.
Status display: 3 green LEDs, 1 red LED.
Input description: Digital, HTL type.
Number of inputs: 10 dual channels (up to SIL 3), 20 single channels (up to SIL 2).
Input voltage range: "0" signal is 0V DC - 5V DC (for safe shutdown); "1" signal is 11V DC - 30V DC.
Cable length: Maximum 2000m.
Power consumption: Typically 4mA.
Number of outputs: 4 safe semiconductor outputs (up to Cat. 4, according to the requirements of EN ISO 13849 - 1), 2 negative switching outputs.
Output voltage: Low state < 5V.
Leakage current: Maximum 2mA.
Maximum capacitive load: Maximum 1µF (electronic components).
Limited continuous current: 2A per channel, with a total current of 2A for all outputs.
Rated output voltage: 24V DC (powered by 24V/0V), with a voltage range of 18V DC - 30V DC (including all tolerances, including residual voltage).
Test pulse: <1ms, voltage 24V DC (powered by 24V/0V), limited continuous current 100mA.
Pluggable: Yes, the connection method is a straight-in connection.
Hard wire cross-section: 0.2mm² - 1.5mm².
Flexible wire cross-section: With a cold-pressed terminal without an insulating sleeve, it is 0.25mm² - 1.5mm² (only the CRIMPFOX 6 wire crimper can be used), and the wire cross-section is AWG 24 - 16.
Width: 67.5mm.
Height: 112mm.
Depth: 114.5mm.
Enclosure material: Non-reinforced polyamide PA.
Enclosure color: Yellow.
Protection class: IP20, with a minimum protection class of IP54 at the insertion position.
Ambient temperature (operation): -20°C - 55°C.
Ambient temperature (storage/transportation): -20°C - 70°C.
Maximum altitude: Maximum 2000m.
Maximum allowable humidity (storage/transportation): 75% (average, sometimes 85%).
Maximum allowable relative humidity (operation): 75% (average, sometimes 85%).
Impact force (operation): 10g (Δt = 11ms, three impacts in each direction); 10g (Δt = 16ms, continuous impact, 1000 impacts in each direction).
Vibration (operation): 2g.
Air pressure (operation): 70kPa - 108kPa (up to an altitude of 3000m).
Air pressure (storage/transportation): 66kPa - 108kPa (up to an altitude of 3500m).